Bewdley Car Stacker Lift

Call for Price

In Stock

Quick Overview

The Bewdley lift is known as a car stacker lift. This lift model allows 3 cars to be parked over the same parking footprint of 1 car. The perfect solution for storage of multiple vehicles, whilst taking up minimum space.

 

Ideal for commercial environments and storage businesses that wants to capitalise on their space. In fact, if you have the internal height this can be installed in domestic and barn buildings too.

 

Bespoke measurements are possible to meet your requirements and we also offer a shared post design system. By using the shared post design you can save further building space when adding the lifts in a row allowing the flexibility of more storage.

 

Optional accessories:

 

Metal infill trays – These prevent any drips from the car above falling on the car below. They are also load bearing, ideal for storing three wheeled cars or trailers. Can be painted to match the lift or a galvanised finish.

 

Coiled Wire – Replaces the standard flexi wire and can be used for the lift main power and for the control panels.

 

Standard features:

Lifting Capacity: 3600kg per platform

Pendent Control Supply: 24V low voltage, push and hold buttons – Up / Down & Lock, Emergency stop button

Power Supply: 240V 50Hz (3ph 380V optional)

Motor: 2.2Kw – Lift motor supplied with 16A male commando plug with 4 metres of cable (per platform)

Up ramps: Fixed with hinges – fold back on themselves by 50%

Unit Weight: 2250kg

Concrete Thickness Spec: 200mm

 

For bespoke lift dimensions and colour options to meet your requirements – please contact us.

Compare

Product Description

The Bewdley lift is known as a car stacker lift. This lift model allows 3 cars to be parked over the same parking footprint of 1 car. The perfect solution for storage of multiple vehicles, whilst taking up minimum space.

 

Ideal for commercial environments and storage businesses that wants to capitalise on their space. In fact, if you have the internal height this can be installed in domestic and barn buildings too.

 

Lift design is a 4 post lift inside a 4 post lift that work independently. This design provides a lifting capacity of 3600kg per platform.

 

Running on a 2.2kw motor the lift only requires 240v single phase power supply. 3 Phase 380V is available upon request. The pendent control panels are 24V low voltage for safety. The Car Stacker requires a 16A C or D rated circuit breaker in your building MCB.

 

Shared Double Side Post Design

Having double sided posts allows you to daisy chain these lifts that really maximises your floor overall footprint. Also makes it a more elegant installation as this system gives you a clean straight finish to the row.

 

Independent Platforms

Each parking platform works independently so if you want to you can just take up the top car rather than having to take up the bottom platform at the same time. Individual control panels for each platform makes it clear what you are operating and touch button controls mean the lift will stop immediately as soon as you remove your finger.

 

Electric Lock Release

Upon you pressing the down button on the control panel, the control system sends a signal to each of the solenoids on the corners of the lift to release the platform when it is time to come down, making the operation nice and simple. Each lift platform has a 24V electric lock release system.

Simply when the lift is raised to your desired height simply press and hold the lock button, this will lower the platform onto the nearest lock position and engage the solenoids. When the lift comes to a rest you can remove you finger from the lock button. Your lift and vehicle are now safely parked.

 

Extra Long Approach Ramps

Double length up ramps for the top level platform allow lower profile cars to access the platform with ease. Each platforms up ramps are hinged in the middle allowing you to fold back the ramps to reduce the overall length when raised in the air. Available in custom colours, contact us for more information.

 

Optional accessories:

 

Metal infill trays – These prevent any drips from the car above falling on the car below. They are load bearing, so ideal for storing three wheeled cars or trailers. Can be painted to match the lift or a galvanised finish.

 

Coiled Wire – Replaces the standard flexi wire and can be used for the lift main power and for the control panels.

 

Standard features:

Lifting Capacity: 3700kg per platform

Pendent Control Supply: 24V low voltage, push and hold buttons – Up / Down & Lock, Emergency stop button

Power Supply: 240V 50Hz (3ph 380V optional)

Motor: 2.2Kw – Lift motor supplied with 16A male commando plug with 4 metres of cable (per platform)

Up ramps: Fixed with hinges – fold back on themselves by 50%

Unit Weight: 2250kg

Concrete Thickness Spec: 200mm

 

For bespoke lift dimensions and colour options to meet your requirements – please contact us.

 

Bewdley Car Stacker_Single lift drawing – Click here

Bewdley Car Stacker_2 lifts with shared columns drawing – Click here

 

Additional information

Packaged Weight 2500 kg
Packaged Dimensions 5.2 × 0.6 × 2.2 m
Capacity

Max Lift Height

DELIVERY OPTIONS TO SUIT

AFTER SALES SUPPORT

UK PARTS BACKUP

FRIENDLY SALES TEAM

X