storage

Showing all 12 results

  • £3,480.00

    Due to the compact construction, it takes as little space and gives a perfect extra parkingplace . No post that block the way and on top of the platform complete free room.Because of the slim scissor there will remain an optimal space for simple and spacious parking. By the width of just 2,5 mtr it fits in almost any ordinary garage.and for lager buildings you can easy convert multiple lifts side by side and so make use of the maximum use of space

     

    By installing the lifts side by side it creates a floor to put cars on and under but still you can operate every single lift. The high lifting height of 2,20 mtr ( top of platform) and 2,00 mtr ( free drive trough)makes it possible for higher cars to park under

     

    The approach ramp is perfect for low-profile vehicles, such as sports cars, race kit builds and vehicles with dropped suspensions, to name a few types. Most parking lift platforms can only achieve this with extra-long approach ramps, and these add-on ramps take up a lot of your precious space. The approach ramp is kept short. To keep it from getting steep, we integrate a gentle incline into the drive-on platform. The incline ends in a small wheel trough that’s just deep enough to catch your wheels and keep them safe without scratching or denting your vehicle.

     

    No lifting cables or clumsy chains are used in our lift. The Alford lifting power comes from two hydraulic cylinders, and its staying power comes from a rugid mechanical locking system.. The cylinders are extra-powerful and feature an impressive flow-divider to ensure both sides of the parking lift rise simultaneously.

  • £2,525.00

    Unique design free standing 4 post car lift using a new stronger wrap around post. The cross beam wraps around the post meaning that the lift remains rigid. This therefore means the lift is free standing and does not need to be bolted down to the floor.

    Using a 240v electro hydraulic motor it lifts the vehicle up to a height of 1800mm.

    This lift is fully CE complaint with mechanical sprung loaded locking mechanism, cable break assembly, parachute valves and 24v dead man controls.

     

    Locks are simply disengaged by the lever on the end of the cross beam when the user wants to go down.

     

    The robust motor is rated at 2.2 kW 240v motor works off standard electrical supply requires only a 16 amp supply, with safety 24v push button controls.

  • £2,825.00

    Extra tall version of our ever popular Alness lift

    Unique design free standing 4 post car lift using a new stronger wrap around post. The cross beam wraps around the post meaning that the lift remains rigid. This therefore means the lift is free standing and does not need to be bolted down to the floor.

    Using a 240v electro hydraulic motor it lifts the vehicle up to a height of 1967mm so you can drive in another car underneath.

     

    This lift is fully CE complaint with mechanical sprung loaded locking mechanism, cable break assembly, parachute valves and 24v dead man controls.

     

    Locks are simply disengaged by the lever on the end of the cross beam when the user wants to go down.

     

    The robust motor is rated at 2.2 kW 240v motor works off standard electrical supply requires only a 16 amp supply, with safety 24v push button controls.

  • £8,500.00

    Unique new launch lift from Strongman tools allowing you to double stack cars on top of each other. Using up the floor footprint of just one lift. Previously this type of system would have been cost prohibitive but due to our new design this is now affordable.

    Strongman are the first and only company to be offering this type of lift in the UK. Maximise your footprint and save on increasing business rates.

    Shared Double Side Posts

    Having double sided posts allows you to daisy chain this system without having to double up on posts. Also makes it a more elegant installation and unlike previous designs of similar lift you would have to stagger them, this system instead gives you a clean straight finish to the row.

    Running on a 240v 2.2kw motor this is ideal for storage businesses in need of a bit more space.

    Independent Platforms

    Each parking level works indipendently so if you want to you can just take up the top car rather than having to take up the bottom platform at the same time. Individual control panels for each platform make it clear what you are opperating and touch button controls mean the lift will stop immediately as soon as you remove your finger.

    Electric Lock Release

    Due to the tall height of this lift we realised that using our standard manual lock release mechanism would not be possible, as it would be impossible to release the locks on the top platform. So to combat this we have developed a 24 electric lock release system that is utilised on each platform. The control system sends a signal to each of the solenoids on the corners of the lift to release the lift when it is time to come down making the operation nice and simple.

    Extra Long Approach Ramps

    Double length up ramps with hinge in the middle for the top level allow lower profile cars to get on without bottoming out, then you fold back the ramps to reduce the length. Simple lift on lift off up ramps can also be specified at order point. Also available in custom colours for quantity orders.

  • £2,050.00

    Home user 4 post lift, ideal for instantly doubling your storage whilst also allowing you to work on your own cars at home. Great value home user four post parking lift.Using a 240v electro hydraulic motor it lifts the vehicle up to a height of 1750mm so you can drive in another car underneath.

     

    This lift is fully CE complaint with mechanical sprung loaded locking mechanism, cable break assembly, parachute valves and 24v dead man controls.

     

    Locks are simply disengaged by the lever on the end of the cross beam when the user wants to go down. Adjustable locking ladder boards allow you to change the locking interval positions. Also can be used to compensate any drops in the floor.

     

    Unique ability to move this lift around with the additional wheel kit. .  Attach the wheels when the lift is in the air and lower down bringing the lift onto the castors. Then move to your new location, remove the wheels and you are ready to go again. Wheel kit is not designed to be used when you have a car on the lift as well.

     

    The robust motor is rated at 2.2 kW motor works off standard electrical supply requires only a 16 amp supply, with safety 24v push button controls as required by CE certification.

     

    Optional drip trays (£20 inc vat each), Mobility kit (£140 inc vat), central tool tray (£145 inc vat)

  • £5,499.00

    Here we have a new launch lift from Strongman tools. An extra tall version of our extra tall Bonar four post lift. Allowing you to get your car up extra high to store taller items below such as caravans or vans.

    Particularly useful for getting cars up and insight of a viewing gallery on a second floor.

    Using a 240v electro hydraulic motor it lifts the vehicle up to a height of 3000mm so you can drive in another car underneath.

    This lift is fully CE complaint with mechanical sprung loaded locking mechanism, cable break assembly, parachute valves and 24v dead man controls.

    Locks are simply disengaged automatically on this lift as it has 24v electro solenoids in the corners so no need to pull down a handle to release.

    Strong powder coat finish mean your lift will last for years.

    The robust motor is rated at 2.2 kW motor works off standard electrical supply requires only a 16 amp supply, with safety 24v push button controls as required by CE certification.

    Lift available with either standard manual lock release mechanism, meaning locks all disengage from a single lever point.

    Optional plastic drip trays (£15 ex vat each),  metal infill panels (£750 ex vat for entire length)

  • £7,235.00

    Unique new launch lift from Strongman tools allowing you to double stack cars on top of each other. Using up the floor footprint of just one lift. Previously this type of system would have been cost prohibitive but due to our new design this is now affordable.

     

    A very compact overall footprint. With only 4854mm long x 2694mm wide. Needing 5647mm of height to stack three cars high.

     

    The motor unit being in a seperate cabinet which is to be placed on the ground behind the lift.

     

    The upper platform, which is slightly shorter, drops to the lower one so that a low ramp height remains for low entry sports cars to drive on. Suitable for two hatchback and one Suv vehicle to be parked.

     

    Running on a 240v 2.2kw motor this is ideal for storage businesses in need of a bit more space.

  • £3,950.00

    Unique designed four post parking lift from Strongman tools with a completely infilled full width platform and full width drive up ramp. This makes this the simplest lift in our range to use for long term storage.

    We have been often approached by clients who want a parking lift and like our traditional two post parking lift design but because of the post location on the two post they get in the way of their door openings. So we have instead designed this four post system that means the doors open between the posts but still gives the benefit of the solid platform to prevent drips on the car below.

  • £3,678.00

    The Donnington is the ultimate car parking lift that Strongman Tools has to offer. This two post car parking lift benefits from an incredibly shallow platform depth meaning you can not only get very low cars on, but also utilises all of the headroom you have.

     

    Designed to allow a user to easily store one car under another. By using the Donnington lift your are making a two car parking space out of just one.
    This lift is offered in three different capacity variants. Starting with the 2300kg capacity which has thin and compact post with a short front leg and no rear leg.
    Unique shared post design allows you to daisy chain lifts in rows, simply adding on another lift at a time. Every extra lift only needs one additional post as all posts are double sided allowing them to be used for platforms on either side.
    A solid galvanised platform allows the user to simply drive their car on to the platform, get out of the vehicle, free of any obstructions and then raise their vehicle to reveal a second space underneath.
    Simple operation
    Just by the touch of a button and the lift will continue to rise till you remove your finger. Complete fail safe locking system with multiple latch positions in each post so you know your car is safely stored away. Then to bring it down again just keep your finger on the down button until the lift reaches the floor and the control gear does the rest for your, automatically disengaging the locks and lowering the lift down on the hydraulics.
    The ideal choice for car dealerships
    By keeping the posts to the back of the lift it gives the appearance that the cars are just parked on a plinth. So when aesthetics are a concern this is the lift to choose. Offering clear views of the car and really showing it off. Solid platform makes it a doddle to drive on and off and prevents any drips of oil onto cars below.
  • £3,350.00

    Findhorn Lifts are our “bread and butter” range! They are a “standard‟ size fully featured lift. Like all of our designs these modern, robust and reliable lifts are built to last, with top quality components and a useful selection of options.

    Super low profile four post lift with 150mm platform thickness, compared to previous 220mm platform. Making it even more suitable for low sports cars to drive on.

    240v single phase operation make this 4 post lift ideal for numerouse applications, be it as a service bay in a commercial workshop or a home enthusiast wanting a lift in their own garage.

    This is a standard size four post lift so similar in size to an MOT bay specification, platforms long enough to take long wheel base Land Rover Defenders and such size vehicles.

    Up ramps for this lift stay attached and remain horizontal as the lift goes up and down, if you however require a lift that you can remove the up ramps during operation then please look at our Bonar parking lift which has removable up ramps.

    Strongman Tools car lifts have built up a reputation in the market for being a brand you can trust for reliability and no nonsense engineering. Whilst our background is in classic car restoration we have developed our range of lifts to a level that they would not look out of place in a commercial workshop.

    Please note lifts do not come with drip trays as standard, these are an optional extra. Priced at £240 for a set.

  • £4,250.00

    The perfect solution for long term storage of vehicles, taking up very minimal space with this double wide four post parking lift. By using a double width it reduces the amount of posts that are used and gives greater flexibility underneath. Two cars up on top and two cars down below

    Low profile platform thickness makes it suitable for track day cars and all the safety features you would expect of any Strongman lift.

    Running on a 240v 2.2kw motor this is ideal for home environments or storage businesses in need of a bit more space.

  • £4,200.00

    Designed to offer unobstructed access below a raised vehicle. The new Telford single post lifts provides the ideal parking solution for domestic customers. For those customers where space is at an absolute premium.

    Powered from a home, single phase, supplies this parking lift will raise a car of up to 2000kgs to a maximum 1850mm. mechanical locks the safety of both cars and users. Most alternative parking solutions have the disadvantages of numerous posts to negotiate.

    Custom colours can be produced at additional costs.

    Folding extended up ramps can also be provided at additional cost, normally comes supplied with just lift on and off ramps.

DELIVERY OPTIONS TO SUIT

AFTER SALES SUPPORT

UK PARTS BACKUP

FRIENDLY SALES TEAM

X