lift

Showing 1–12 of 19 results

  • £3,480.00

    Due to the compact construction, it takes as little space and gives a perfect extra parking place . Because of the slim scissor there will remain an optimal space for simple and spacious parking. With a width of just 2.56m it fits in almost any ordinary garage and for larger buildings you can easy add multiple lifts side by side to make use of the maximum use of space.

     

    Ease of use, press the up button to the one lock stop set at the 2.0m and then press the lock button. Your car is securely parked on the raised platform.

     

    When the lift is at full height this provides a 1.9m underneath clearance suitable for up to SUV sized cars to be parked.

     

    The approach ramp is perfect for low-profile vehicles, such as sports cars, race kit builds and vehicles with dropped suspensions, to name a few types. Most parking lift platforms can only achieve this with extra-long approach ramps, and these add-on ramps take up a lot of your precious space. The approach ramp is kept short. To keep it from getting steep, we integrate a gentle incline into the drive-on platform. The incline ends in a small wheel trough that’s just deep enough to catch your wheels and keep them safe without scratching or denting your vehicle.

     

    The Alford lifting power comes from two hydraulic cylinders, with a balancing system to ensure a level lift at all times. The lifts staying power comes from a rigid mechanical locking system.

  • £2,850.00

    Unique design free standing 4 post car lift using a new stronger wrap around post. The cross beam wraps around the post meaning that the lift remains rigid. This therefore means the lift is free standing and does not need to be bolted down to the floor.

    Using a 240v electro hydraulic motor it lifts the vehicle up to a height of 1800mm.

    This lift is fully CE complaint with mechanical sprung loaded locking mechanism, cable break assembly, parachute valves and 24v dead man controls.

     

    Locks are simply disengaged by the lever on the end of the cross beam when the user wants to go down.

     

    The robust motor is rated at 2.2 kW 240v motor works off standard electrical supply requires only a 16 amp supply, with safety 24v push button controls.

  • £3,500.00

    Extra tall version of our ever popular Alness lift

    Unique design free standing 4 post car lift using a new stronger wrap around post. The cross beam wraps around the post meaning that the lift remains rigid. This therefore means the lift is free standing and does not need to be bolted down to the floor.

    Using a 240v electro hydraulic motor it lifts the vehicle up to a height of 1967mm so you can drive in another car underneath.

     

    This lift is fully CE complaint with mechanical sprung loaded locking mechanism, cable break assembly, parachute valves and 24v dead man controls.

     

    Locks are simply disengaged by the lever on the end of the cross beam when the user wants to go down.

     

    The robust motor is rated at 2.2 kW 240v motor works off standard electrical supply requires only a 16 amp supply, with safety 24v push button controls.

  • Call for Price

    Unique new launch lift from Strongman tools allowing you to double stack cars on top of each other. Using up the floor footprint of just one lift. Previously this type of system would have been cost prohibitive but due to our new design this is now affordable.

    Strongman are the first and only company to be offering this type of lift in the UK. Maximise your footprint and save on increasing business rates.

    Shared Double Side Posts

    Having double sided posts allows you to daisy chain this system without having to double up on posts. Also makes it a more elegant installation and unlike previous designs of similar lift you would have to stagger them, this system instead gives you a clean straight finish to the row.

    Running on a 240v 2.2kw motor this is ideal for storage businesses in need of a bit more space.

    Independent Platforms

    Each parking level works indipendently so if you want to you can just take up the top car rather than having to take up the bottom platform at the same time. Individual control panels for each platform make it clear what you are opperating and touch button controls mean the lift will stop immediately as soon as you remove your finger.

    Electric Lock Release

    Due to the tall height of this lift we realised that using our standard manual lock release mechanism would not be possible, as it would be impossible to release the locks on the top platform. So to combat this we have developed a 24 electric lock release system that is utilised on each platform. The control system sends a signal to each of the solenoids on the corners of the lift to release the lift when it is time to come down making the operation nice and simple.

    Extra Long Approach Ramps

    Double length up ramps with hinge in the middle for the top level allow lower profile cars to get on without bottoming out, then you fold back the ramps to reduce the length. Simple lift on lift off up ramps can also be specified at order point. Also available in custom colours for quantity orders.

  • £2,400.00

    The Bonar 4 post parking lift instantly doubles your storage within the footprint of one car parking space. Our 4 post parking lift also allows you to work on your cars either for light maintenance /repair work or for restoration work.

     

    Our Bonar 4 post parking lift is fully CE complaint and is ideal for home garages, workshops and car facility warehouses.

     

    Designed for ease of use the locks are simply disengaged with the manual lever on the end of the cross beam. Adjustable locking ladder system allows you to change the locking interval positions of the platform height. This ensures your cars are parked within your building space.

     

    The 4 post parking lift can be freestanding or fixed to the floor. With the optional mobility kit this allows for the Bonar lift to be moved around your building. Once repositioned, remove the wheel kit and the lift is ready to use again. The mobility kit is not designed to be used when you have a car on the lift.

     

    The motor is rated at 2.2 kW motor works off standard electrical supply 240V and requires only a 16 amp supply. The lift control panel comes with safety 24v push button controls.

     

    Delivery & Installation service available upon request.

    Optional accessories:

    Drip tray set (£54 inc vat), Mobility kit (£140 inc vat), Central tool tray (£145 inc vat), Jacking beam (625 inc vat)

  • Call for Price

    Here we have a new launch lift from Strongman tools. An extra tall version of our extra tall Bonar four post lift. Allowing you to get your car up extra high to store taller items below such as caravans or vans.

    Particularly useful for getting cars up and insight of a viewing gallery on a second floor.

    Using a 240v electro hydraulic motor it lifts the vehicle up to a height of 3000mm so you can drive in another car underneath.

    This lift is fully CE complaint with mechanical sprung loaded locking mechanism, cable break assembly, parachute valves and 24v dead man controls.

    Locks are simply disengaged automatically on this lift as it has 24v electro solenoids in the corners so no need to pull down a handle to release.

    Strong powder coat finish mean your lift will last for years.

    The robust motor is rated at 2.2 kW motor works off standard electrical supply requires only a 16 amp supply, with safety 24v push button controls as required by CE certification.

    Lift available with either standard manual lock release mechanism, meaning locks all disengage from a single lever point.

    Optional plastic drip trays (£15 ex vat each),  metal infill panels (£750 ex vat for entire length)

  • Call for Price

    Unique new launch lift from Strongman tools allowing you to double stack cars on top of each other. Using up the floor footprint of just one lift. Previously this type of system would have been cost prohibitive but due to our new design this is now affordable.

     

    A very compact overall footprint. With only 4854mm long x 2694mm wide. Needing 5647mm of height to stack three cars high.

     

    The motor unit being in a seperate cabinet which is to be placed on the ground behind the lift.

     

    The upper platform, which is slightly shorter, drops to the lower one so that a low ramp height remains for low entry sports cars to drive on. Suitable for two hatchback and one Suv vehicle to be parked.

     

    Running on a 240v 2.2kw motor this is ideal for storage businesses in need of a bit more space.

  • £1,700.00

    Next batch of lifts due to be ready for delivery and collection end of February 2021.

    New design Strongman Clifton coming September 2020. Pre order yours now. We have decided what we think was already the best mid rise scissor lift on the market, even better. Unique design to Strongman, with two separate platforms that then get joined by a torsion bar during installation. This unique design gives the user access down the middle of the car like no other mid rise lift on the market. With other lifts having at least two bars that get in the way of transmission jacks and creeper seats. You cannot get this design lift anywhere else, it is designed by Strongman and completely unique to Strongman.

    The Clifton is our top spec surface mounted Mid-Rise Platform Scissor Car Lift. Designed to utilise an advanced assisted fulcrum this lift is effortless in operation and provides ‘Two Stage Lowering’.

    Undoubtedly the class leader in terms of build quality, employing top grade steel and the best quality welds, compared to competitive product our price/performance easily surpasses all other lifts of this type making it the clear choice for your workshop.

    Optional mobility kit priced at £180 inc vat. This does not come included with the kit.

    Lift has the following lock stop points:

    470mm-560mm-625mm-680mm-73-mm-780mm-820mm-850mm-885mm-920mm-950mm-980mm.

     

    Movement of this lift, from bay to bay is a simple task with our unique mobility kit designed with you the customer in mind. The Clifton needs to be raised, two wheels are attached to the scissor arm, then as it is lowered the wheels come down through cut outs in the baseplates raising the lift off the floor to enable it to be moved. It is ideal in a Fast Fit environment and has been designed to be moved from bay to bay and be ready to lift in less than 5 minutes.

     

    Please be aware that the lift comes delivered in a purpose made wooden crate, the delivery service we offer is via a third party delivery company who will deliver the lift via tail lift to your drive. The use of a forklift makes getting the lift out of the box a doddle. However it can also be done with trolley jacks and an engine crane. It is imperative that you understand there is a small amount of self assembly to do on this lift once it is received, including attaching up ramps, limit switches and filling with oil. This is all possible for a competent home mechanic to do themselves.

  • Call for Price

    The Conwy scissor mezzanine lift is a part of the Strongman floor to floor lift range.

     

    A solid platform scissor lift designed to raise cars over multiple floor levels, For heights over 3.5m please see our Conwy XL.

     

    The Conwy is a single scissor design providing durability and stability with a smooth lifting operation.

     

    With an impressive 3 ton lifting capacity this makes the lift a good choice for multiple applications from car storage facilities to busy main dealerships.

     

    We offer the full package from design , supply to delivery and installation.

     

    Using push button controls the lift platform is elevated to the appropriate level for the car or goods to be transferred between two or more levels.

     

    All our scissors come with full CE certification and safety systems included.

  • Call for Price

    Modern innovative double deck underground vehicle parking system.

    The solid deck structure and components are completely concealed below ground so there is no indication that a lift or second car is present when lowered.

    A cost effective and smart solution for both commercial and residential parking applications.

    Available in a multitude of different colour finishes, all designed to try and blend in with the surroundings as much as possible.

    Also zinc paint coating and galvanised finishes available for the outdoor environments.

    Ideal for outdoor installation such as in gardens or garage access zones, Can double up parking spaces or hide vehicles completely underground, keeping them secure.

    The top platform can be parked over when the lift has been lowered down, instantly giving you extra parking or as a drive through.

    We can also provide the increased load capacity to allow for the car to be lifted on the top platform when the lift is in use.

    The roof has an option for an access hatch for emergency access and maintenance work.

    The lift can be used as a car elevator and designed to allow for a car to drive off the lower platform into an underground garage space.

  • Call for Price

    The Conwy XL scissor mezzanine lift is a part of the Strongman floor to floor lift range.

     

    A solid platform scissor lift designed to raise cars over multiple floor levels, to floor heights up to 4.7m.

     

    The Conwy XL is a double scissor design providing durability and stability with a smooth lifting operation.

     

    With an impressive 3 ton lifting capacity this makes the lift a good choice for multiple applications from car storage facilities to busy main dealerships.

     

    Using push button controls the lift platform is elevated to the appropriate level for the car or goods to be transferred between two or more levels.

     

    We offer the full package from design , supply to delivery and installation.

     

    All our scissors come with full CE certification and safety systems included.

  • £3,950.00

    Unique designed four post parking lift from Strongman tools with a completely infilled full width platform and full width drive up ramp. This makes this the simplest lift in our range to use for long term storage.

    We have been often approached by clients who want a parking lift and like our traditional two post parking lift design but because of the post location on the two post they get in the way of their door openings. So we have instead designed this four post system that means the doors open between the posts but still gives the benefit of the solid platform to prevent drips on the car below.

DELIVERY OPTIONS TO SUIT

AFTER SALES SUPPORT

UK PARTS BACKUP

FRIENDLY SALES TEAM

X