home

Showing all 8 results

  • £3,364.00

    The Alness is a free standing 4 post car lift by using a strong wrap around post design. The cross beam wraps around the post meaning that the lift remains rigid and self supporting. No need for the lift to be bolted down to the floor, ideal if you have underfloor heating or electrical cables within your concrete floor.

     

    The vehicle raises up to a maximum height of 1800mm providing an underneath clearance of 1685mm.

     

    This lift is fully CE complaint with safety 24v push button controls on the panel

     

    2.2 kW motor works off a 240V single phase electrical supply and requires a 16 amp C or D rated circuit breaker.

     

    Mobility kit, jacking tray, drip tray set and an aluminium up ramp set all included in the price. Price does include VAT.

  • £3,000.00

    The Bonar 4 post parking lift instantly doubles your storage within the footprint of one car parking space. Our 4 post parking lift also allows you to work on your cars either for light maintenance /repair work or for restoration work.

     

    Our Bonar 4 post parking lift is fully CE complaint and is ideal for home garages, workshops and car storage facilities.

     

    Designed for ease of use the locks are simply disengaged with the manual lever on the end of the cross beam. Adjustable locking ladder system allows you to change the locking interval positions of the platform height. This ensures your cars are parked within your building space.

     

    The 4 post parking lift can be freestanding or fixed to the floor. With the optional mobility kit this allows for the Bonar lift to be moved around your building. Once repositioned, remove the wheel kit and the lift is ready to use again. The mobility kit is not designed to be used when you have a car on the lift.

     

    The motor is rated at 2.2 kW motor works off standard electrical supply 240V and requires only a 16 amp supply. The lift control panel comes with safety 24v push button controls.

     

    Price above includes VAT

    Delivery & Installation service quotation available upon request

     

    Optional accessories:

    Drip tray set (£54 inc vat), Mobility kit (£140 inc vat), Central tool/jack tray (£100 inc vat), Jacking beam (625 inc vat)

  • £1,930.00

    The Clifton is our top spec surface mounted Mid-Rise Platform Scissor Car Lift. Designed to utilise an advanced assisted fulcrum this lift is effortless in operation and provides ‘Two Stage Lowering’.

     

    Unique split platform design allows central access to the underneath of your vehicle. Removing the mobility bar allows flush floor access for mechanics stool, oil drainer, transmission jack etc.

     

    Lift comes 2 sets of rubber mounting blocks: 4 x 30mm height & 4 x 60 mm height. These are designed to marry up to provide a 90 mm height block ideal for some vans & 4×4’s. Additional block sets are available to purchase at £45 inc vat.

     

    Lift price includes VAT.

    Delivery and installation pricing available upon request.

     

    Maximum lifting height is 1000mm

    Lift has the following lock stop points:

    470mm-560mm-625mm-680mm-73-mm-780mm-820mm-850mm-885mm-920mm-950mm-980mm.

     

     

    Need to move the lift?

    Our solution is our Clifton mobility kit which does not included with the lift. Designed with the customer in mind this can be fitted easily to allow for moving the lift in a matter of minutes. This is priced at £180 inc vat.

     

    Low clearance car access needed? 

    Our solution is our low profile up ramp extension set. A 4 piece set to ensure your car can access both ends of the lift. These allow a subtle approach angle over a longer approach length. Ideal for low clearance cars. This set is priced at £300 inc vat.

     

    Narrow Car?

    Our solution is a narrow plate conversion kit which brings the clearance between the platforms from 900mm to 500mm. This makes the overall width of the lift smaller so good for compact areas as well as ride on lawnmowers, golf carts/buggies and Quad bikes. This is priced at £190 inc vat.

     

    Inboard chassis rails or pickup points on your car? 

    Our solution is a crossbeam that forms a bridge across the standard size platform clearance to position the rubber mounting blocks. This is priced at £160 inc vat.

     

    Please contact us for more information on our accessories on 01926 298800 or [email protected]

     

    Please be aware that the lift comes delivered in a purpose made wooden crate, the delivery service we offer is via a third party delivery company who will deliver the lift via tail lift to your drive.  It is imperative that you understand there is a small amount of self assembly to do on this lift once it is received, including attaching torsion plate & up ramps, connecting limit switches and filling with oil. This is all possible for a competent home mechanic to do themselves and a lifting aid like an engine crane is recommended to assist in the assembly of the lift.

  • £3,950.00

    Unique designed four post parking lift from Strongman tools with a completely infilled full width platform and full width drive up ramp. This makes this the simplest lift in our range to use for long term storage.

    We have been often approached by clients who want a parking lift and like our traditional two post parking lift design but because of the post location on the two post they get in the way of their door openings. So we have instead designed this four post system that means the doors open between the posts but still gives the benefit of the solid platform to prevent drips on the car below.

  • £3,800.00

    The Donnington is the ultimate car parking lift that Strongman Tools has to offer. This two post car parking lift benefits from an incredibly shallow platform depth meaning you can not only get very low cars on, but also utilises all of the headroom you have.

     

    Designed to allow a user to easily store one car under another. By using the Donnington lift your are making a two car parking space out of just one.
    This lift is offered in three different capacity variants. Starting with the 2300kg capacity which has thin and compact post with a short front leg and no rear leg.
    Unique shared post design allows you to daisy chain lifts in rows, simply adding on another lift at a time. Every extra lift only needs one additional post as all posts are double sided allowing them to be used for platforms on either side.
    A solid galvanised platform allows the user to simply drive their car on to the platform, get out of the vehicle, free of any obstructions and then raise their vehicle to reveal a second space underneath.
    Simple operation
    Just by the touch of a button and the lift will continue to rise till you remove your finger. Complete fail safe locking system with multiple latch positions in each post so you know your car is safely stored away. Then to bring it down again just keep your finger on the down button until the lift reaches the floor and the control gear does the rest for your, automatically disengaging the locks and lowering the lift down on the hydraulics.
    The ideal choice for car dealerships
    By keeping the posts to the back of the lift it gives the appearance that the cars are just parked on a plinth. So when aesthetics are a concern this is the lift to choose. Offering clear views of the car and really showing it off. Solid platform makes it a doddle to drive on and off and prevents any drips of oil onto cars below.
  • £5,200.00

    The perfect solution for long and short term storage of vehicles, taking up very minimal space with this double wide four post parking lift.

    By using a double wide platform this eliminates the centre posts and gives greater flexibility underneath for wider cars.

    Store and park 4 cars with one lift: 2 cars up on top and 2 cars down below.

    Low profile platform thickness makes it suitable for low clearance cars and all the safety features you would expect of any Strongman lift.

    Running on a 240v 2.2kw motor, the lift comes with the electric lock release feature.

    Ideal for home environments or storage businesses in need more space.

  • £2,700.00

    Our Holt lift is a surface mounted scissor lift and is designed for car maintenance and repair work. When fully raised the provides full standing height of 1.9m underneath when the lift is at its full height.

     

    240v single phase making it suitable home garages as well as workshops.

     

    The lift comes with load bearing up ramps, these can be locked into place either at one end of the lift or both ends. This feature extends the overall platform length up to 2030 mm, ideal for longer vehicles.

     

    The lift comes with a lifting capacity of 3000 kg, allowing you to lift cars, SUVs, vans and 4x4s making this a very versatile lift.

     

    Double hydraulic cylinders provides positive pressure on both sides of the ram seals meaning there is no need for a mechanical lock. The benefits of this are the lift locks at any height you require and  comes straight down when you want to lower the vehicle.

     

  • £1,560.00

    The Tamar is a freestanding 2800kg capacity portable mid-rise scissor lift. This unit is the perfect lift for body shops and wheel service specialists that need extra lifting height.

     

    This portable lift easily raises a 2.8T car or light truck to a comfortable working height of up to 1200mm.

     

    The unique platform design of the Tamar allows access to some areas on the underside of the car not easily accessible with other portable mid-rise lifts. The dual power cylinders and the unique safety lock bar system, with different lock positions, make the Tamar one of the most popular mid-rise lifts sold in the UK and overseas.

     

    Simply drive over the lift making sure your tyres are straddling either side, then swing out the lifting arms to underneath your jacking points or suitable lifting point on the underside of the car. Then place four of the supplied rubber pads onto the ends of the arms and you are ready to go. Simply pressing the up button will then raise the vehicle and have it so the wheels are free. Push button operation means that as soon as you take your finger off the up button the lift stops and does not raise any more.

     

    Our Tamar has been thoroughly tested to meet Industry standards. The Tamar mid-rise lift is powered by a 240-volt power unit that is mounted on a portable cart. The power unit can be positioned to allow for maximum efficiency. This power unit cart is also used to move the Tamar on a smooth level surface. This lift can easily be rolled from an inside work bay to an outside concrete apron work area in just a few minutes.

     

    The Tamar is a complete mid-rise lift that includes 3 sets of rubber lifting pads. The arms can be adjusted to an almost infinite amount of positions to accommodate unique lifting points found on certain vehicles. The large “foot print” of the Tamar creates a steady platform for the raised vehicle.

    Standard arm set max width: 1400 mm

    XL arm set max width: 1580 mm

    XL arm set is an optional extra.

DELIVERY OPTIONS TO SUIT

AFTER SALES SUPPORT

UK PARTS BACKUP

FRIENDLY SALES TEAM

X